Skip to content Skip to sidebar Skip to footer

Builder Extreme 2000 PRO

If you are looking for a printer that has a large, fast, accurate, automatic, and secure build, then Builder Extreme 2000 PRO is the answer. Builder Extreme 2000 PRO is one of the best 3-dimensional printers today, having a maximum print volume (XYZ) of 700x700x1700 mm which makes it capable of printing even small and large objects. The printer is also equipped with various advanced features such as automatic filament detection system, BOFA air filter, door locking system, supporting software, and various nozzle options. In terms of design, Builder Extreme 2000 PRO is designed as efficiently as possible to be able to accommodate all functions without reducing the availability of features to be added. To create an optimal design for all workspaces.

Builder Extreme 2000 PRO comes with Simplify3D software and FFF profiles that can optimize the choice of nozzle 1.2 mm, 0.4 mm, and 0.8 mm. Then the Builder's advanced software is also combined with a 7-inch touch screen control panel that can ease the printing process. Through the display panel you can adjust the temperature, nozzle, light, and even replace the filament. Screen control can also be configured with a mobile device that allows it to control printing through the device's camera.

To ensure the safety and safety of workers, Builder Extreme 2000 PRO has a fully enclosed housing system. Transparent doors installed allow you to be able to monitor the printing process. However, for security reasons, the door can only be opened if the printing process is paused. A closed housing system can also reduce engine noise by 40% and can increase the temperature of the bed. So that the resulting print is more adhesive and stronger.

In general, Builder Extreme 2000 PRO has the following specifications: technology (FDM / FFF), machine dimensions (1340x1050x2240 mm), filament diameter (1.75 mm), print build size (700x700x1700 mm), travel speed (500 mm / s), print speed (300 mm / s), layer resolution (0.1 - 0.9 mm), heated bed (up to 60 ° C), power rating (1400 W, after heating 800 W), print material (PLA 1.75 mm, PET 1.75 mm , PRO1 ABS replacement 1.75 mm, Flexible filaments 1.75 mm), connectivity (Wi-Fi, USB port, Ethernet).

Post a Comment for "Builder Extreme 2000 PRO"